INCLUDED:
Choose either 2.5kg fully pasteurised 50/50 coir/vermiculite bulk substrate (aka damion5050 tek)
or - 2.5kg fully pasteurised 50/50 manure/vermiculite bulk substrate (aka horse poo tek)
500g Sterilised grain spawn WITH injection port
1kg fully pasteurised casing layer (aka jiffy tek)
1x surgical mask
1x pair of latex gloves
1x alcohol swab
Medical grade rubber self healing injection port (Installed on grain bag)
Link to full instructions by clicking here
Automated, computer controlled pasteurisation and sterilisation for 120 mins
Quality controlled production
Free from contamination or your money back
No quibble customer services
 
Also included if you order the kit with a culture:
10ml King oyster gourmet edible mushroom culture (Pleurotus eryngii)
18G needle
1x extra alcohol swab
 
 
You will need to source the following from around the home:
1 approximately 50L Plastic container with a lid (or 2x smaller ones)
Micropore tape and polyfill etc. (for making your monotub)
Cleaning agents (for containers and working area) 70% alcohol, 3% peroxide or lysol
Spores (if ordering without our king oyster culture)
 
Brief instructions (full instructions on our 'How to Guides' page)
- Inoculate this sterile grain with your favourite top fruiting mushroom strain.
- Allow grain to fully colonise.
- Clean your monotub, tools and all 3 bags inside and out.
- Fill monotub with the 2.5kg bag of bulk substrate (the large bag).
- Break up and thoroughly mix in the grain spawn.
- Cover with the casing layer.
- Allow to colonise.
- Fruit mushrooms.

Wear surgical gloves and a mask, clean gloved hands in 70% Isopropyl alcohol. Use an alcohol wipe to sanitise your injection port for 30 seconds. Now flame sterilise your needle red hot and then use a wipe to cool the needle. Alternatively, dispense a small quantity of culture or spore solution into something nearby, this will also cool your needle enough to inject the bag. Inject 3-5ml into the grain (depending os size of grain bag) Gently agitate the grain being very careful not to tear the bag… Even better, use a homemade glove box to carry out the above procedure. Make one easily from a clear plastic tote/storage box, cut out 2 hand holes, spray down inside and out with diluted bleach (5%bleach : 95%water) or 70% isopropyl alcohol.